GUARDIAN ROPE ANCHOR DEVICE 5/8in-3/4in
The Guardian Fall Protection Rope Anchor functions to integrate an anchorage connector with a vertical lifeline system. It eliminates the need to use knots when tying off the rope thus maintaining the strength of the rope. To use, install rope through the Rope Anchor according to the provided instructions, and either connect it with a compatible carabiner to a separate anchorage connector, or loop around a compatible anchor point and pull rope through the Rope Anchor to create a self-contained system. The Rope Anchor is certified to withstand loads up to 5,000 pounds, is made from lightweight and corrosion resistant aluminum, and is incredibly simple to use.
Quick and easy to use.
Vertical lifeline anchor point.
Maintains strength of rope.
Use with 5/8in or 3/4in. approved rope.
Worker Capacity: 130-310 lbs.
Min. Breaking Strength: 5,000 lbs.
Material: Powder Coated Aluminum
Max. Workers: 1
Weight: 8 oz.
Activities involving the use of this equipment as a component of a descent or fall protection system
are inherently dangerous.
You are responsible for your own actions, decisions and safety.
Before using this equipment, you must:
- Read and understand all instructions for use.
- Get specific training in its proper use.
- Become acquainted with its capabilities and limitations.
- Understand and accept the risks involved.
Failure to heed any of these warnings may result in severe injury or death.
This product must only be used by competent and responsible persons, or those placed under the direct and visual control of a competent and responsible person.
Contact the International Window Cleaners Association (IWCA) for the Safety Standard for Window Cleaners, IWCA I-14.1-2000 and safety certification programs. You should also refer to local safety standards as they can differ from the IWCA I-14.1-2001.
Rope Access and Fall Protection equipment are not returnable nor refundable.